2015 Generac SD250
Call for Price
Overview
Availability
Brochure
Year2015
MakeGenerac
ModelSD250
Product Features
Description
For industry, power failure is not an option. Generac industrial diesel gensets are custom configured to meet the specific requirements of each application. Heavy duty engines have proven their performance and reliability in industrial applications.
Engine
- Crankcase: (Capacity) 28 L / 29.57 qts
- Crankshaft: Dropped Forged Steel
- Cylinder Head: 4- Valve
- Cylinders: 6
- Air Induction System: Turbocharged/Aftercooled
- Alternator Amp: Std
- Alternator: (Standard Model) 520 mm Generac ; (Poles) 4 ; (Field Type) Revolving ; (Insulation Class - Rotor) H ; (Insulation Class - Stator) H ; (Total Harmonic Distortion) <5% ; (Telephone Interference Factor) <50 ; (Standard Excitation) Permanent Magnet ; (Bearings) Single Sealed Cartridge ; (Coupling) Direct, Flexible Disc ; (Load Capacity - Standby) 100% ; (Prototype Short Circuit Test) Yes ; (Voltage Regulator Type) Digital ; (# of Sensed Phases) All ; (Steady State Regulation Accuracy) +/- 0.25%
- Battery: (Size @ 0ºC) 995 CCA ; (Group) 31 ; (Voltage) (2) 12VDC ; (Ground Polarity) Negative
- Bore x Stroke: 117 x 135 mm / 4.61 x 5.31 in
- Compression Ratio: 16.5:1
- Coolant Heater: (Wattage) 2000 ; (Standard Voltage) 240VAC
- Cooling System: Closed Recovery
- Displacement: 8.7 L
- Emission: (EPA Compliance) Stationary Emergency
- Fan: (Type) Pusher ; (Speed - rpm) 1854 ; (Diameter) 762 mm / 30 in
- Fuel Type: Ultra Low Sulfur Diesel Fuel
- Fuel: (Specifications) ASTM ; (Filtering - microns) 5 ; (Inject Pump Make) Electronic ; (Pump Type) Engine Driven Gear ; (Injector Type) Common Rail ; (Engine Type) Direct Injection ; (Supply Line) 12.7(½") ; (Return Line) 12.7(½")
- Governor: Electronic Isochronous ; (Steady State Frequency Regulation) +/- 0.25%
- Make: Iveco / FPT
- Oil Filter: Full-Flow
- Oil Pump: Gear
- Pistons: Aluminum
- Type: In-Line
- Voltage: (System) 24VDC
- Water Pump: Pre-Lubed, Self Sealing
Features
- Alternator - ; Two-Thirds Pitch ; Layer Wound Rotor & Stator ; Class H Materials ; Digital 3-Phase Voltage Control
- Controls - ; Encapsulated Board W/ Sealed Harness ; 4-20mA Voltage-To-Current Sensors ; Surface-Mount Technology ; Advanced Diagnostics & Communications
- Engine - ; EPA Compliant ; Industrial Tested, Generac Approved ; Power-Matched Output ; Industrial Grade
- Generator Set - ; Prototype & Torsionally Tested ; UL2200 Tested ; Rhinocoat Paint System ; Wide Range Of Enclosures And Tanks
Engine
| Displacement | 8.7 L |
Other
| Fuel Tank Capacity | (Specifications) ASTM ; (Filtering - microns) 5 ; (Inject Pump Make) Electronic ; (Pump Type) Engine Driven Gear ; (Injector Type) Common Rail ; (Engine Type) Direct Injection ; (Supply Line) 12.7(½") ; (Return Line) 12.7(½") |
